
Gas piping in Tulsa starts with one question: which side of the meter is it on? Oklahoma Natural Gas maintains the lines that bring gas to the meter for your house or building. Past the meter, the piping is yours, and the work on it belongs to a licensed contractor. This post covers where ONG’s part ends and yours begins, what we run gas for, why a line that worked for years can come up short, how a gas job goes, and what to do if you ever smell gas.
Where ONG Stops and You Start
ONG’s own customer newsletter draws the line at the meter. ONG maintains the pipelines that deliver gas to the meter for the main house or building. The homeowner is responsible for the piping beyond the meter, both inside the house and running out to another building or an outdoor appliance, like a gas grill or a pool heater.
The same newsletter says customer-owned piping should be checked periodically for leaks and corrosion, and that the inspection and any repairs should be done by a licensed contractor, such as a qualified plumber. Our Oklahoma plumbing license (#180753) covers gas piping. We do our own gas work and we never sub it out.
What We Run Gas For
Most gas calls are an appliance going in, coming out, or moving. In the last two years our invoices include gas lines for standby generators, an outdoor grill, a fireplace insert, and gas lanterns on a front porch, along with dryer and range hookups, water heaters, and capping a line when an appliance comes out for good. We also find and fix leaks on the customer side of the meter.
On the commercial side, we run gas piping for kitchen equipment and rooftop units, including a gas supply system for four rooftop units on one building.
Why a Line That Worked for Years Comes Up Short
Gas pipe is sized off the total BTU load of every appliance on the system and the distance from the meter. So adding a tankless water heater, a range, or a shop heater can outrun a line that was perfectly adequate before. That can mean a larger line off the meter, and once in a while it means asking the gas company for a larger meter.
Tankless is the classic example. A 50 gallon tank burns around 40,000 BTU and a whole house tankless runs 150,000 to 199,000, so the half inch line that fed your old tank almost never covers it. An undersized line only shows itself while the appliance is firing, so that’s when we check the gas pressure. Our tankless water heater page covers the rest of that install.
How a Gas Job Goes
We look at the whole system
Before we price anything, we look at what’s already on the line and what you’re adding: every gas appliance in the house, how far the new one sits from the meter, and the route the pipe has to take to get there. Brand names and a few photos help us load the right parts before we leave the shop.
You get the price before we start
You get a written price before anything starts. If something changes once we’re in, it gets written up and priced before we do the work, so you’re approving it instead of discovering it on the invoice.
Permit, pressure test, and inspection
We pull the permit and we meet the inspector. Plan on a rough-in inspection before anything gets covered and a pressure test on any gas we run.
Why Gas Isn’t a DIY Job
We take small jobs, and when a plumbing problem turns out to be something you can handle yourself, we’ll tell you that instead of driving out there. Gas isn’t one of those. We never want you doing gas yourself. Never guess on gas, and never modify a gas line yourself, even a short one for a grill or a range that moved a few feet.
If You Ever Smell Gas
If you smell gas, get everybody out first. Once you’re outside, call 911 and Oklahoma Natural Gas at 800-458-4251. That’s ONG’s own instruction to its customers. Finding and fixing a leak on your side of the meter is licensed contractor work, and that part is a call to us.
What Gas Work Costs
Gas jobs run from a dryer hookup to a full supply system for a commercial building, so there isn’t one number that means anything. What moves the price is how far the new line runs from the meter, the route it takes (open framing, finished walls, the attic, or a trench across the yard), whether the existing line has to be upsized for the new load, and the permit and pressure test. We provide pricing before we start work so there aren’t any surprises.
Planning Gas Work?
Whether it’s a line for a new range, a generator, or a tankless, or gas for a restaurant kitchen or rooftop units, call Tulsa Plumbing & Remodeling at (918) 800-4426. Tell us what’s going in and where. On commercial work, get us in early, before the slab gets poured and the kitchen equipment gets ordered. Our commercial plumbing page covers the rest of what we do for businesses.